Author Topic: ZERO Buddy  (Read 600 times)

vaughanatworld

  • Newly registered
  • Posts: 1
ZERO Buddy
« on: July 09, 2016, 10:04:03 AM »
I just received a "ZERO Buddy" for the Raspberry PI ZERO.

I am interested in how to run power to the buddy board and the pi board. I could burn something out by mixing 5 and 3.3V

Is there a schematic available for the board?
Alternatively, is there a brief description for how to set the jumper and use the power pins on the buddy.

Better safe than sorry.

Regards
Brian

Mike

  • Administrator
  • Sr. Member
  • *****
  • Posts: 295
Re: ZERO Buddy
« Reply #1 on: July 13, 2016, 06:25:16 AM »
Hi, please look at this picture:




The power cable has one pin not used, so the unused pin facing up.

thanks

Mike

  • Administrator
  • Sr. Member
  • *****
  • Posts: 295
Re: ZERO Buddy
« Reply #2 on: July 13, 2016, 01:50:47 PM »