Difference between revisions of "How to Install GIMX Firmware on TIAO GBoard/GIMX Adapter"

From TIAO's Wiki
Jump to: navigation, search

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
(Install the Firmware)
Line 30: Line 30:
  
 
* First we need to connect the board to your computer, use the USB to Mini USB B cable to connect the ATMEGA32U4 USB port to your PC's USB port: [[Image:gimx-firmware-connection.png|none]]
 
* First we need to connect the board to your computer, use the USB to Mini USB B cable to connect the ATMEGA32U4 USB port to your PC's USB port: [[Image:gimx-firmware-connection.png|none]]
* Once the board is connected to your PC, you will notice this notification: [[Image:gimx-Newdevice.png|none]]
+
* Once the board is connected to your PC, you will notice this notification: [[Image:Newdevice.png|none]]
* Click it and you will see this: [[Image:Gimx-atmega32u4-dm.png|none]]
+
* Click it and you will see this: [[Image:atmega32u4-dm.png|none]]
 
* Right mouse click on it and select update driver...
 
* Right mouse click on it and select update driver...
* Select Browse my computer for driver software:[[Image:Gimx-updatedriver.png|none]]
+
* Select Browse my computer for driver software:[[Image:updatedriver.png|none]]
 
* Use the browse button to locate the driver software:
 
* Use the browse button to locate the driver software:
  

Revision as of 11:20, 28 April 2016








Buy various JTAG cables for your Satellite Receiver, Cable Modem, Wireless Router, Standard Wiggler from http://www.easymg.com and http://www.diygadget.com

How to Install GIMX Firmware on TIAO GBoard/GIMX Adapter

TIAO GBoard/GIMX Adapter is a combined development board, integrates USB to COM converter, and an ATMEGA32U4 chip. This is great for AVR development. However it is also very easy to use it as a GIMX adapter, no need to solder anything!

In this tutorial, we are going to show you how to install GIMX firmware on to TIAO GBoard/GIMX Adapter

Required Hardware

Required Software

Install the Firmware

  • First we need to connect the board to your computer, use the USB to Mini USB B cable to connect the ATMEGA32U4 USB port to your PC's USB port:
    Gimx-firmware-connection.png
  • Once the board is connected to your PC, you will notice this notification:
    Newdevice.png
  • Click it and you will see this:
    Atmega32u4-dm.png
  • Right mouse click on it and select update driver...
  • Select Browse my computer for driver software:
    Updatedriver.png
  • Use the browse button to locate the driver software:









Buy various JTAG cables for your Satellite Receiver, Cable Modem, Wireless Router, Standard Wiggler from http://www.easymg.com and http://www.diygadget.com



10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!