How to Load Firmware to TIAO Black Flash USB+ Universal Flash Programmer

From TIAO's Wiki
Revision as of 21:47, 2 September 2013 by Admin (talk | contribs) (Created page with "<meta name="keywords" content="TIAOWIKI,JTAG,TJTAG,FTA,JTAG,WRT54G,DD-WRT,urjtag, openocd, flashrom,USB jtag, debrick,tomato,router,wireless router,motorola modem,sb5100,wiggl...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!








Buy various JTAG cables for your Satellite Receiver, Cable Modem, Wireless Router, Standard Wiggler from http://www.easymg.com and http://www.diygadget.com


Overview

The TIAO Black Flash USB+ Universal Flash Programmer (BlackflashUSB+) is a universal flash programmer with integrated USB to Serial converter (TTL level) and 2 port USB 2.0 hub. It is fully compatible with flashcatusb, thus you can use open source software to program your flash chips.

In this tutorial, we will show you how to load firmware to TIAO Black Flash USB+ Universal Flash Programmer (BlackflashUSB+).

Install Drivers

Please follow How to install TIAO Black Flash USB+ Universal Flash Programmer Driver on Windows Vista or Windows 7 to install drivers.

Enter Bootloader Mode

Following TIAO Black Flash USB Universal Flash Programmer User's Manual#Mode_Change_Switch to switch the programmer into bootloader mode.









Buy various JTAG cables for your Satellite Receiver, Cable Modem, Wireless Router, Standard Wiggler from http://www.easymg.com and http://www.diygadget.com



10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
Retrieved from "http://www.tiaowiki.com/wiki/index.php?title=How_to_Load_Firmware_to_TIAO_Black_Flash_USB%2B_Universal_Flash_Programmer&oldid=2075"