Difference between revisions of "How to install TIAO Black Flash USB+ Universal Flash Programmer Driver on Windows Vista or Windows 7"

From TIAO's Wiki
Jump to: navigation, search

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
(Created page with "<meta name="keywords" content="TIAOWIKI,JTAG,TJTAG,FTA,JTAG,WRT54G,DD-WRT,urjtag, openocd, flashrom,USB jtag, debrick,tomato,router,wireless router,motorola modem,sb5100,wiggl...")
 
 
(3 intermediate revisions by the same user not shown)
Line 12: Line 12:
 
== Install TIAO Black Flash USB+ Universal Flash Programmer Driver on Windows Vista or Windows 7 ==
 
== Install TIAO Black Flash USB+ Universal Flash Programmer Driver on Windows Vista or Windows 7 ==
  
In this tutorial , I will show you how to install the drivers for [[http://www.diygadget.com/black-flash-usb-universal-memory-programmer-with-integrated-usb-to-com-ttl-and-two-port-usb-2-0-hub.html TIAO Black Flash USB+ Universal Flash Programmer (BlackflashUSB+)]] on Vista or Windows 7.
+
In this tutorial , I will show you how to install the drivers for [https://www.diygadget.com/jtag-cables-and-microcontroller-programmers/149-black-flash-usb-universal-memory-programmer-with-integrated-usb-to-com-ttl-and-two-port-usb-2-0-hub.html TIAO Black Flash USB+ Universal Flash Programmer (BlackflashUSB+)] on Vista or Windows 7.
  
The [[http://www.diygadget.com/black-flash-usb-universal-memory-programmer-with-integrated-usb-to-com-ttl-and-two-port-usb-2-0-hub.html TIAO Black Flash USB+ Universal Flash Programmer (BlackflashUSB+)]] is a universal flash programmer with integrated USB to Serial converter (TTL level) and 2 port USB 2.0 hub.  It is fully compatible with flashcatusb, thus you can use open source software to program your flash chips.
+
The [https://www.diygadget.com/jtag-cables-and-microcontroller-programmers/149-black-flash-usb-universal-memory-programmer-with-integrated-usb-to-com-ttl-and-two-port-usb-2-0-hub.html TIAO Black Flash USB+ Universal Flash Programmer (BlackflashUSB+)] is a universal flash programmer with integrated USB to Serial converter (TTL level) and 2 port USB 2.0 hub.  It is fully compatible with flashcatusb, thus you can use open source software to program your flash chips.
 
   
 
   
 
Before you begin the install process, make sure you have the following software and hardware ready:
 
Before you begin the install process, make sure you have the following software and hardware ready:
  
# [[http://www.diygadget.com/black-flash-usb-universal-memory-programmer-with-integrated-usb-to-com-ttl-and-two-port-usb-2-0-hub.html TIAO Black Flash USB+ Universal Flash Programmer (BlackflashUSB+)]]
+
# [https://www.diygadget.com/jtag-cables-and-microcontroller-programmers/149-black-flash-usb-universal-memory-programmer-with-integrated-usb-to-com-ttl-and-two-port-usb-2-0-hub.html TIAO Black Flash USB+ Universal Flash Programmer (BlackflashUSB+)]
 
# A good quality USB to Mini USB cable, the shorter the better. (The ones come with your digital cameras are usually very good)
 
# A good quality USB to Mini USB cable, the shorter the better. (The ones come with your digital cameras are usually very good)
# Driver for the flash programmer: [http://www.tiaowiki.com/download//file.php?id=39 FlashcatUSB Driver/Binary]
+
# Driver for the flash programmer: [http://www.tiaowiki.com/w/File:Flashcat-usb-3.01.rar FlashcatUSB Driver/Binary]
 
# Driver for the USB to Serial: [http://www.tiaowiki.com/download//file.php?id=41 USB to Serial]
 
# Driver for the USB to Serial: [http://www.tiaowiki.com/download//file.php?id=41 USB to Serial]
  
Line 26: Line 26:
  
 
# Inspect the adapter, make sure no bend pins or anything abnormal.  Make sure all jumpers are at the correct position.  There is only one jumper on the board, default is on the 3.3v header.
 
# Inspect the adapter, make sure no bend pins or anything abnormal.  Make sure all jumpers are at the correct position.  There is only one jumper on the board, default is on the 3.3v header.
# Download the Black Flash USB+ driver from [http://www.tiaowiki.com/download//file.php?id=39 FlashcatUSB Driver/Binary], unzip it to a temp directory.
+
# Download the Black Flash USB+ driver from [http://www.tiaowiki.com/w/File:Flashcat-usb-3.01.rar FlashcatUSB Driver/Binary], unzip it to a temp directory.
 
# Download the USB to Serial driver from [http://www.tiaowiki.com/download//file.php?id=41 USB to Serial], unzip it to another temp folder.
 
# Download the USB to Serial driver from [http://www.tiaowiki.com/download//file.php?id=41 USB to Serial], unzip it to another temp folder.
 
# Windows will install the driver for the USB 2.0 hub automatically, so you do NOT need to install anything for it.
 
# Windows will install the driver for the USB 2.0 hub automatically, so you do NOT need to install anything for it.
Line 42: Line 42:
 
Now your TIAO Black Flash USB+ universal flash programmer is ready to use!
 
Now your TIAO Black Flash USB+ universal flash programmer is ready to use!
  
Please go back to our [http://www.tiaowiki.com/w/JTAG_Tutorials#TIAO_Black_Flash_USB.2B_Universal_Flash_Programmer_Tutorials_and_Manuals JTAG tutorial wiki] to checkout the tutorial on this programmer!
+
Please go back to our [[JTAG_Tutorials]] to checkout the tutorial on this programmer!
  
 
<span class="plainlinks">
 
<span class="plainlinks">

Latest revision as of 21:19, 3 November 2017








Buy various JTAG cables, flash programmers for your Satellite Receiver, Cable Modem, Wireless Router, Standard Wiggler from http://www.easymg.com and http://www.diygadget.com


Install TIAO Black Flash USB+ Universal Flash Programmer Driver on Windows Vista or Windows 7

In this tutorial , I will show you how to install the drivers for TIAO Black Flash USB+ Universal Flash Programmer (BlackflashUSB+) on Vista or Windows 7.

The TIAO Black Flash USB+ Universal Flash Programmer (BlackflashUSB+) is a universal flash programmer with integrated USB to Serial converter (TTL level) and 2 port USB 2.0 hub. It is fully compatible with flashcatusb, thus you can use open source software to program your flash chips.

Before you begin the install process, make sure you have the following software and hardware ready:

  1. TIAO Black Flash USB+ Universal Flash Programmer (BlackflashUSB+)
  2. A good quality USB to Mini USB cable, the shorter the better. (The ones come with your digital cameras are usually very good)
  3. Driver for the flash programmer: FlashcatUSB Driver/Binary
  4. Driver for the USB to Serial: USB to Serial

Let's begin the install:

  1. Inspect the adapter, make sure no bend pins or anything abnormal. Make sure all jumpers are at the correct position. There is only one jumper on the board, default is on the 3.3v header.
  2. Download the Black Flash USB+ driver from FlashcatUSB Driver/Binary, unzip it to a temp directory.
  3. Download the USB to Serial driver from USB to Serial, unzip it to another temp folder.
  4. Windows will install the driver for the USB 2.0 hub automatically, so you do NOT need to install anything for it.
  5. Do NOT connect the Black Flash USB+ to the computer, run the PL2303_Prolific_DriverInstaller_v1.8.0.exe program from the temp folder to install the USB to Serial adapter driver.
  6. Once step 5 successfully complete, use the good quality USB to Micro USB cable (USB cable from your digital camera or camcorder) to connect your computer and the Black Flash USB+, LED D3 should be ON.
  7. Open up device manager, you should see these three devices:
    Devicemanager-3items.jpg
  8. Right mouse click on the first "ATmega 32U2 DFU", then select "Update Driver Software..."
    Updatedriver-bfu+.jpg
  9. In the dialog, select "Browser my computer for driver software"
    003-install-driver-bfu+.jpg
  10. Click "Browse" button to select the unzipped directory of FlashcatUSB driver (unzipped at step 2). In my example, I unzipped to c:\flashcatUSB. Then click Next
    004-select-driver-folder-bfu+.jpg
  11. You will see a pop up Windows Security message box, select "Install this driver software anyway"
    005-install-anyway-bfu+.jpg
  12. Installing:
    006-installing-bfu+.jpg
  13. Install finished:
    007-installed-bfu+.jpg
  14. Device manager should be refreshed automatically, you will see this:
    008-blackcatusb-indm-bfu+.jpg

Now your TIAO Black Flash USB+ universal flash programmer is ready to use!

Please go back to our JTAG_Tutorials to checkout the tutorial on this programmer!








Buy various JTAG cables for your Satellite Receiver, Cable Modem, Wireless Router, Standard Wiggler from http://www.easymg.com and http://www.diygadget.com



10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!