How to install TIAO USB Multi Protocol Adapter Driver on Windows XP

From TIAO's Wiki
Revision as of 20:48, 5 August 2011 by Admin (talk | contribs)
Jump to: navigation, search

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!








Buy various JTAG cables for your Satellite Receiver, Cable Modem, Wireless Router, Standard Wiggler from http://www.easymg.com and http://www.diygadget.com

Install TIAO USB Multi Protocol Adapter Driver on Windows XP

In this tutorial , I will show you how to install the drivers for TIAO USB Multi Protocol Adapter (TUMPA) on Windows XP.

  1. Inspect the adapter, make sure no bend pins or anything abnormal. Make sure all jumpers are at the correct position.
  2. Download the TUMPA driver from here, unzip it to a temp directory.
  3. Use a USB cable (USB cable from your digital camera or camcorder) to connect your computer and the TUMPA.
  4. In the notification tray, you may see this message:
    System.notify.jpg
  5. Then, you will see found new hardware wizard. In this wizard, click on "No, not this time", then click "Next" button:
    Not.this.time.jpg
  6. Then, choose "Install from a list or specific location (Advanced)":
    Install.from.a.dir.jpg
  7. Click "Browse" button to select the unzipped directory of TUMPA driver (unzipped at step 2). In my example, I unzipped to f:\dev. Then click Next
    Install.from.a.dir.jpg


  1. Open up device manager in control panel, you will see TIAO USB Multi Protocol Adapter are listed in Other Devices category.
    Otherdevices.TUMPA.jpg
  2. Right mouse click on the first "TIAO USB Multi Protocol Adapter", then select "Update Driver Software..."
    Update.driver.software.jpg
  3. In the dialog, select "Browser my computer for driver software"
    Browse.computer.for.driver.software.jpg
  4. Click "Browse" button to select the unzipped directory of TUMPA driver (unzipped at step 2). In my example, I unzipped to d:\dev\jtag. Then click Next
    Add.directory.of.TUMPA.driver.jpg
  5. You will see a pop up Windows Security message box, select "Install this driver software anyway"
    Install.this.driver.anyway.jpg
  6. Now you have installed "TIAO USB Multi Protocol Adapter A"
    TUMPA.driver.installed.7..jpg
  7. Repeat step 6-10 for another "TIAO USB Multi Protocol Adapter".
  8. Now, in your device manager, you have 2 more other devices: "USB Serial Port"
    UsbSerialPort.jpg
  9. Repeat the step 6-10 again for these two "USB Serial Port" devices
  10. Now you have successfully installed TIAO USB Multi Protocol Adapter on your Windows Vista or 7.


Buy various JTAG cables for your Satellite Receiver, Cable Modem, Wireless Router, Standard Wiggler from http://www.easymg.com and http://www.diygadget.com



10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
Retrieved from "http://www.tiaowiki.com/wiki/index.php?title=How_to_install_TIAO_USB_Multi_Protocol_Adapter_Driver_on_Windows_XP&oldid=1392"