Mini Portable 150Mbps Wi-Fi Wireless AP/Client/Router/Bridge/Repeater FW150RM Client Mode Instruction

From TIAO's Wiki
Revision as of 21:54, 4 July 2016 by Admin (talk | contribs) (Created page with "<meta name="keywords" content="TIAOWIKI,Smart sprinkler controller, raspberry pi, wifi, network, PCB, Prototype, Cheap, fast, schematic, protel, altium, eagle, expressPCB, JTA...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!

How to setup FM150RM to client mode

FM150RM is a portable Wireless AP/Client/Router/Bridge/Repeater. In this tutorial, we are going to setup it up to work in client mode, which allows a wired device to be connected to a wifi network. For example, the TIAO Smart Sprinkler does not support wifi, however it does support wired network. You can use FM150RM (in client) mode to connect TIAO Smart Sprinkler to the internet.

Check the existing Wifi information

In order to connect to an existing wifi network, we need the following information of the existing wifi system:

  • SSID
  • Router's MAC address
  • Wifi password


10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
Retrieved from "http://www.tiaowiki.com/wiki/index.php?title=Mini_Portable_150Mbps_Wi-Fi_Wireless_AP/Client/Router/Bridge/Repeater_FW150RM_Client_Mode_Instruction&oldid=2513"