Difference between revisions of "Mini Portable 150Mbps Wi-Fi Wireless AP/Client/Router/Bridge/Repeater FW150RM Client Mode Instruction"
From TIAO's Wiki
10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
(Created page with "<meta name="keywords" content="TIAOWIKI,Smart sprinkler controller, raspberry pi, wifi, network, PCB, Prototype, Cheap, fast, schematic, protel, altium, eagle, expressPCB, JTA...") |
(No difference)
|
Revision as of 21:54, 4 July 2016
How to setup FM150RM to client mode
FM150RM is a portable Wireless AP/Client/Router/Bridge/Repeater. In this tutorial, we are going to setup it up to work in client mode, which allows a wired device to be connected to a wifi network. For example, the TIAO Smart Sprinkler does not support wifi, however it does support wired network. You can use FM150RM (in client) mode to connect TIAO Smart Sprinkler to the internet.
Check the existing Wifi information
In order to connect to an existing wifi network, we need the following information of the existing wifi system:
- SSID
- Router's MAC address
- Wifi password
10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
