TIAO Smart Network Sprinkler Controller User Manual - Button and LCD

From TIAO's Wiki
Revision as of 01:24, 7 October 2015 by Admin (talk | contribs) (Button and LCD)
Jump to: navigation, search

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!

TIAO Smart Network Sprinkler Controller

For system connection diagram, please refer to TIAO Smart Network Sprinkler Controller System Connection Diagram.

The TIAO Smart Network Sprinkler Controller (TSS) is a piece of hardware controls your irrigation systems. It replaces your traditional sprinkler controller.

Get TSS ready

Make sure the system is correctly connected, especially power and Ethernet cable. If you are sure everything is correct, you can turn TSS on by sliding the power switch to ON position (up towards to Ethernet connector). If everything is OK, the 2 LEDs on the board will be turned ON, and the LCD will display the hardware version. The controller will initialize itself, connect to NTP server etc. Once it is done, you will be presented with the following screen:

Tss-lcd-default.jpg


Button and LCD

LCD

Tss-lcd-info.jpg
  • Top row display time and date.
  • Bottom display status.
  • Master station (if defined) is marked by letter 'M', master station 2 (if defined) is marked by letter 'N'.
  • Each running station is displayed with animation: '.' -> 'o' -> 'O'.
  • The rain status icon is displayed if rain is detected (via rain sensor), or a manual rain delay time is in effect.
  • the microSD icon is displayed if a microSD card is detected.


10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!