Difference between revisions of "TIAO Smart Network Sprinkler Controller User Manual - Sprinkler Scheduling"

From TIAO's Wiki
Jump to: navigation, search

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
(Initial setup)
(Initial setup)
Line 32: Line 32:
  
 
[[Image:OSScreen005.jpg|none]]
 
[[Image:OSScreen005.jpg|none]]
 +
 +
Device time is automatically synced up with NTP server, so no need to change.
 +
Click the location drop down to set your location.
 +
 +
[[Image:OSScreen006.jpg|none]]
 +
 +
If you have master station(s), you can configure it here, otherwise skip it.
 +
 +
[[Image:OSScreen007.jpg|none]]

Revision as of 03:43, 8 October 2015

TIAO Smart Network Sprinkler Controller

For system connection diagram, please refer to TIAO Smart Network Sprinkler Controller System Connection Diagram.

The TIAO Smart Network Sprinkler Controller (TSS) is a piece of hardware controls your irrigation systems. It replaces your traditional sprinkler controller.

Get TSS ready

Make sure the system is correctly connected, especially power and Ethernet cable. If you are sure everything is correct, you can turn TSS on by sliding the power switch to ON position (up towards to Ethernet connector). If everything is OK, the 2 LEDs on the board will be turned ON, and the LCD will display the hardware version. The controller will initialize itself, connect to NTP server etc. Once it is done, press and release B1 button to check the IP address of TSS. For example: 192.168.1.33.

Now, open a browser window from desktop/laptop/smart phone device, and in the address bar input field, type in http://<ip address of TSS>, for example: http://192.168.1.33, you will be presented with the following screen:


OSScreen001.jpg

The default password is opendoor.

Once you are logged in, you will be presented with the following screen:

OSScreen002.jpg

Don't worry if you only see 8 stations. We will change it later on (since TSS can control up to 16 stations without expansion board).

Initial setup

Click/tap on the options button
OSS-OptionsBtn.jpg
and select Edit Options from the menu.
OSScreen005.jpg

Device time is automatically synced up with NTP server, so no need to change. Click the location drop down to set your location.

OSScreen006.jpg

If you have master station(s), you can configure it here, otherwise skip it.

OSScreen007.jpg


10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!