TIAO Smart Network Sprinkler Controller User Manual - Sprinkler Scheduling

From TIAO's Wiki
Revision as of 03:30, 8 October 2015 by Admin (talk | contribs) (Created page with "<meta name="keywords" content="TIAOWIKI,Smart sprinkler controller, raspberry pi, wifi, network, PCB, Prototype, Cheap, fast, schematic, protel, altium, eagle, expressPCB, JTA...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!

TIAO Smart Network Sprinkler Controller

For system connection diagram, please refer to TIAO Smart Network Sprinkler Controller System Connection Diagram.

The TIAO Smart Network Sprinkler Controller (TSS) is a piece of hardware controls your irrigation systems. It replaces your traditional sprinkler controller.

Get TSS ready

Make sure the system is correctly connected, especially power and Ethernet cable. If you are sure everything is correct, you can turn TSS on by sliding the power switch to ON position (up towards to Ethernet connector). If everything is OK, the 2 LEDs on the board will be turned ON, and the LCD will display the hardware version. The controller will initialize itself, connect to NTP server etc. Once it is done, press and release B1 button to check the IP address of TSS. For example: 192.168.1.33.

Now, open a browser window from desktop/laptop/smart phone device, and in the address bar input field, type in http://<ip address of TSS>, for example: http://192.168.1.33, you will be presented with the following screen:


OSScreen001.jpg

The default password is opendoor.



10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
Retrieved from "http://www.tiaowiki.com/wiki/index.php?title=TIAO_Smart_Network_Sprinkler_Controller_User_Manual_-_Sprinkler_Scheduling&oldid=2376"