Which tools are needed for my device?

From TIAO's Wiki
Revision as of 13:00, 1 December 2011 by Admin (talk | contribs)
Jump to: navigation, search

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!








Buy Game Console Adapters from http://www.easymg.com or http://www.diygadget.com

What tools do I need?

Don't know what tools are needed for your testing work? We have compiled the following table for you. You should be able to find out the tools needed for your job.

Samsung

The following table contains the tools needed for Samsung drive:

# Brand Model Firmware Version Unlock Method Power the Drive SATA Access Key Extraction Key Extraction Bundle JTAG/NAND Flasher
1. Samsung (TS-H943) MS25/MS28 Stock Firmware Unlock not needed DIYGADGET Connectivity Kit V3 VT6421A PCI-SATA or VT6421 PCMCIA to SATA Probe not needed Probe not needed Parallel JTAG, USB NAND Flasher or USB NAND Flasher with solderless addon
2. Xtreme 3.3 to iXtreme 1.4 Activate.iso
3. iXtreme 1.5 to 1.61 Unlock via DIYGADGET Connectivity Kit V3 (tray half open method)
4. iXtreme LT Unlock not needed
5. Bad flash or above methods do not work Unlock using DIYGADGET PMT Tool


Hitachi

The following table contains the tools needed for Hitachi drive:

# Brand Model Firmware Version Unlock Method Power the Drive SATA Access Key Extraction Key Extraction Bundle JTAG/NAND Flasher
1. Hitachi Pre V78, V78 and V79 Stock firmware or non-stock firmware Soft mode-b via JF DIYGADGET Connectivity Kit V3 VT6421A PCI-SATA or VT6421 PCMCIA to SATA Probe not needed Probe not needed Parallel JTAG, USB NAND Flasher or USB NAND Flasher with solderless addon


Benq

The following table contains the tools needed for Benq drive:

# Brand Model Firmware Version Unlock Method Power the Drive SATA Access Key Extraction Key Extraction Bundle JTAG/NAND Flasher
1. Benq Stock, iXtreme 1.1 to 1.41, Xtreme/iXtreme LT Benq unlock via JF DIYGADGET Connectivity Kit V3 VT6421A PCI-SATA or VT6421 PCMCIA to SATA Probe not needed Probe not needed Parallel JTAG, USB NAND Flasher or USB NAND Flasher with solderless addon
2. iXtreme 1.5 to 1.61 Unlock via DIYGADGET Connectivity Kit V3 (tray half open method)



Buy Game Console Adapters from http://www.easymg.com or http://www.diygadget.com



10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!