Which tools are needed for my device?

From TIAO's Wiki
Revision as of 14:37, 2 December 2011 by Admin (talk | contribs)
Jump to: navigation, search

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!








Buy Game Console Adapters from http://www.easymg.com or http://www.diygadget.com

What tools do I need?

Don't know what tools are needed for your testing work? We have compiled the following table for you. You should be able to find out the tools needed for your job.

Original (Phat)

The following table contains the tools needed for original (phat) drives:

# Brand Model Firmware Version Unlock Method Power the Drive SATA Access Key Extraction Key Extraction Bundle JTAG/NAND Flasher
1. Samsung (TS-H943) MS25/MS28 Stock Firmware Unlock not needed DIYGADGET Connectivity Kit V3 VT6421A PCI-SATA or VT6421 PCMCIA to SATA Probe not needed Probe not needed Parallel JTAG, USB NAND Flasher or USB NAND Flasher with solderless addon
2. Xtreme 3.3 to iXtreme 1.4 Activate.iso
3. iXtreme 1.5 to 1.61 Unlock via DIYGADGET Connectivity Kit V3 (tray half open method)
4. iXtreme LT Unlock not needed
5. Bad flash or above methods do not work Unlock using DIYGADGET PMT Tool
6. Hitachi Pre V78, V78 and V79 Stock firmware or non-stock firmware Soft mode-b via JF DIYGADGET Connectivity Kit V3 VT6421A PCI-SATA or VT6421 PCMCIA to SATA Probe not needed Probe not needed Parallel JTAG, USB NAND Flasher or USB NAND Flasher with solderless addon
7. Benq Stock, iXtreme 1.1 to 1.41, Xtreme/iXtreme LT Benq unlock via JF DIYGADGET Connectivity Kit V3 VT6421A PCI-SATA or VT6421 PCMCIA to SATA Probe not needed Probe not needed Parallel JTAG, USB NAND Flasher or USB NAND Flasher with solderless addon
8. iXtreme 1.5 to 1.61 Unlock via DIYGADGET Connectivity Kit V3 (tray half open method)
9. Liteon PLDS DG-16D2S Stock 74850C Not needed DIYGADGET Connectivity Kit V3 VT6421A PCI-SATA or VT6421 PCMCIA to SATA DIYGADGET USB Probe or Serial Probe DIYGADGET CK3 + USB Bundle or CK3+Serial Probe Bundle Parallel JTAG, USB NAND Flasher or USB NAND Flasher with solderless addon
10. Stock 83850C v1 Not needed via SATA
11. Stock 83850C V2 or Stock 93450C or 83850C V2 and 93450C with iX LT or 74850C, 83850C V1 with ix LT DIYGADGET Solderless MRA tool or DIYGADGET LT Switch Probe not needed DIYGADGET CK3 + Solderless MRA Kit or DIYGADGET CK3 + LT Switch Kit
12. 83850C V2, 93450C with ix1.61 or 74850C, 83850C V1 with Pre-iX LT, Not needed Probe not needed Probe not needed



Buy Game Console Adapters from http://www.easymg.com or http://www.diygadget.com



10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!