Tiao Black Flash USB problem

This site is best viewed in a modern browser with JavaScript enabled.

Tiao Black Flash USB problem

christianrodher

volkan-k wrote: You may try;
a) using different firmware (please contact TIAO Customer Care to get another firmware)
b) disabling usb HUB that is inside BlackFlashUSB
c)Using new usb cable which has dual power input for more power

i cant get into bootloader mode anymore after putting the spi firmware. How can i upload another firmware?
how do i disable usb HUB that is inside BlackFlashUSB?

[deleted]

You can always contact TIAO Corp., Customer Care for your inquiry;

They can be contacted via email at . However they recommend you to open support ticket at http://www.csbooth.com/ for fast, traceable response. They don't provide phone support at this moment.

ricktendo

I have the same problem

I tried disabling the USB hub but that does not fix the problem
I am also looking for BCUSB.3.01.SPI.hex, anybody have it or know what version of Blackcat USB software had this firmware version?

[deleted]

I forwarded your issue to;

TIAO corp.
@Mike
blackcatusb.net owner
user @cabel (thinking that he still has the older firmware)

please stay tuned.

ricktendo

Just tested your suggestion using a dual powered usb cord and problem still persists, so we know its not really a power issue
http://i.imgur.com/dCbpTB6.jpg

[deleted]

thanks for your feedback. i modified my post accordingly.

cabel

Hello to everybody, i cannot upload the BCUSB 3.01 spi firmware here but i sent it today to Will (Global Moderator) (he sent me his e-mail address), so he probably will upload it to this forum. Tested again: 3.01 working, 3.04 and 3.05 giving that error.

[deleted]

@cabel ; could you please upload the file to one of following mirror sites and please share the download link here;

cabel

~~http://go4up.com/dl/9ac862ff040d/BCUSB.RC15.321.zip~~
edit by volkan-k;
Notice for users: do not download sponsored .exe files on go4up. you should only download 9.5 MB .zip file.
I mirrored the proper file on Sourceforge.net: http://sourceforge.net/projects/zjtag/files/BCUSB/BCUSB.RC15.321.zip/download

ricktendo

Thank you so much cabel, finally a working spi firmware

What implications using older firmware has I don't know, hopefully it does not mean it will lessen amount of spi devices supported

ricktendo

I will attach 3.01 SPI firmware bellow, for future users with same problem

TheTwo

Thanks everyone, especially cabel, I have uploaded firmware 3.0.1 here:
http://www.tiaowiki.com/download//file.php?id=49

TheOne

Use the reset switch in 'bootloader' mode to go to 3.0.1 firmware, and should be able to save motherboard. All should be good!