TIAO GIMX System Connection Diagram

From TIAO's Wiki
Revision as of 16:21, 27 April 2016 by Admin (talk | contribs) (Created page with "<meta name="keywords" content="TIAOWIKI,Smart sprinkler controller, raspberry pi, wifi, network, Game Input MultipleXer or Game Input MatriX, GBoard, PCB, Prototype, Cheap, fa...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!

TIAO GIMX System Connection Diagram

For hardware layout, please refer to TIAO GBoard/GIMX Board Hardware Layout.

The TIAO GBoard / GIMX adapter is a combined all in one board for serial and AVR development. It also provides jumper connections for easy and quick GIMX connectoion (to be used as a GIMX Game Input MultipleXer or Game Input MatriX adapter. For more information on GIMX, please check it out here.

The TIAO GBoard/GIMX Adapter features:

  • All in one board contains USB to COM adapter and ATMEVA32U4 for AVR development.
  • Bootloader is installed on the ATMEGA32U4, so you don't need a programmer to load the firmware.
  • Quick connection jumpers to convert the GBoard to a GIMX adapter
  • RX/TX LED, enable LEDs or use the pins for IO ports

Convert TIAO GBoard to a GIMX USB Adapter

The board is designed for quick and easy connection, no mess up with soldering!

Please follow the following diagram for the connection:

Gimx-system.png


10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!