How to install TIAO USB Multi Protocol Adapter Driver on Windows Vista or Windows 7

From TIAO's Wiki
Revision as of 20:11, 5 August 2011 by Admin (talk | contribs)
Jump to: navigation, search

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!








Buy various JTAG cables for your Satellite Receiver, Cable Modem, Wireless Router, Standard Wiggler from http://www.easymg.com and http://www.diygadget.com

Install TIAO USB Multi Protocol Adapter Driver on Windows Vista or Windows 7

In this tutorial , I will show you how to install the drivers for TIAO USB Multi Protocol Adapter (TUMPA) on Vista or Windows 7.

  1. Inspect the adapter, make sure no bend pins or anything abnormal. Make sure all jumpers are at the correct position.
  2. Download the TUMPA driver from here, unzip it to a temp directory.
  3. Use a USB cable (USB cable from your digital camera or camcorder) to connect your computer and the TUMPA.
  4. Vista or 7 will report driver install failed, this is normal.
  5. Open up device manager in control panel, you will see TIAO USB Multi Protocol Adapter are listed in Other Devices category.
    Otherdevices.TUMPA.jpg
  6. Right mouse click on the first "TIAO USB Multi Protocol Adapter", then select "Update Driver Software..."
    Update.driver.software.jpg
  7. In the dialog, select "Browser my computer for driver software"
    Browse.computer.for.driver.software.jpg




Buy various JTAG cables for your Satellite Receiver, Cable Modem, Wireless Router, Standard Wiggler from http://www.easymg.com and http://www.diygadget.com



10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
Retrieved from "https://www.tiaowiki.com/wiki/index.php?title=How_to_install_TIAO_USB_Multi_Protocol_Adapter_Driver_on_Windows_Vista_or_Windows_7&oldid=1378"