View source for TIAO GIMX System Connection Diagram

<meta name="keywords" content="TIAOWIKI,Smart sprinkler controller, raspberry pi, wifi, network, Game Input MultipleXer or Game Input MatriX, GBoard, PCB, Prototype, Cheap, fast, schematic, protel, altium, eagle, expressPCB, JTAG,TJTAG,FTA,JTAG,WRT54G,DD-WRT,debrick,tomato,router,wireless router,motorola modem,sb5100,wiggler,arm,mips,avr,buffered jtag,unbuffered jtag,10 pin,20 pin, 12 pin,xbox,xbox 360,modchip mod-chip,mod chip,liteon,lite-on,samsung,hitachi,lg,dvd rom,sata,dvd key,usb probe,cable modem, usb spear,serial spear, serial probe, extract dvd key,mod xbox 360,video games"></meta>
<meta name="description" content="TIAO GBoard GIMX Board Adapter"></meta>

== TIAO GIMX System Connection Diagram ==

For hardware layout, please refer to [[TIAO GBoard/GIMX Board Hardware Layout]].
For loading the firmware, please refer to [[How to Install GIMX Firmware on TIAO GBoard/GIMX Adapter]]

The [http://www.diygadget.com/development-boards/tiao-gimx-gboard-game-input-multiplexer-matrix-usb-serial-and-atmega32u4-development-board.html TIAO GBoard / GIMX adapter] is a combined all in one board for serial and AVR development.  It also provides jumper connections for easy and quick GIMX connectoion (to be used as a GIMX Game Input MultipleXer or Game Input MatriX adapter.   For more information on GIMX, please check it out [http://blog.gimx.fr/ here].

The TIAO GBoard/GIMX Adapter features:

* All in one board contains USB to COM adapter and ATMEVA32U4 for AVR development.  
* Bootloader is installed on the ATMEGA32U4, so you don't need a programmer to load the firmware.
* Quick connection jumpers to convert the GBoard to a GIMX adapter
* RX/TX LED, enable LEDs or use the pins for IO ports

=== Convert TIAO GBoard to a GIMX USB Adapter ===

The board is designed for quick and easy connection, no mess up with soldering!

Please follow the following diagram for the connection:

[[Image:gimx-system.png||none]]