Difference between revisions of "Xbox 360 Lite On DVD Key Dumping - TIAO's USB Key Extractor"

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!

Revision as of 18:58, 6 May 2009

Buy Game Console Adapters from http://www.easymg.com or http://www.diygadget.com

Why you need to extract the key?

The newer XBOX 360 comes with lite-on DVD drive. It is impossible do dump the firmware from these lite-on DVD drives. However, a new method was developed so you can at least extract the DVD key / identification from these lite-ons. You can then use the key/identification to spoof iXtreme and flash the spoofed iXtreme to a SAMSUNG/LG/BENQ or even the original Lite-on (after Dec 24/2008).

Lite-On DG16D2S

This drive started to appear in machines manufactured after 20th April 2008 (2008-04-20).

Here is how to figure out whether you have a lite-on or not:

1. Remove XBOX 360 front Faceplate
2. See which colour the wires are in the hole under the DVD Tray
3. Yellow wires: you have lite-on DVD drive
4. White wires: you have BENQ drive

You can also search on [XBOX 360 DVD Drive Database] for more information.

How it works

Basically, you will need to perform the following steps:

1. Disassemble XBOX 360 (Remove Lite-on DVD drive from XBOX 360)
2. Remove Lite-on DVD back cover
3. Extract DVD key and identification strings
4. Prepare spoofed iXtreme firmware
5. Flash the spoofed firmware to a BENQ/SAMSUNG/LG or original Lite-on

Tools required

In order to get the key and flash the DVD drive to a spoofed iXtreme firmware, you will need the following tools or components:

1. XBOX 360 case opening tool with TORX bit. Buy from [here] or [here]
2. Access to your PC's native SATA port, or a PCI to SATA card. A VT6421A powered PCI to SATA card works best. USB to SATA convert does NOT work. Buy VT6421A PCI to SATA controller card from [here] or [here]
3. A XBOX DVD power adapter. Buy from [here], [here],[here, [here], [here]
4. A USB version of TIAO's Lite-on DVD key extractor. Buy from [here] or [here]
5. Xtractor reader, a software used for extracting the key, spoof the firmware and flash the DVD drive. Download from [here]
6. PortIO32, a library for accessing COM/LPT ports in Windows. Download it from [here]

To make your life easier, we have created a package, contains the XBOX 360 Connectivity Kit V3 and USB version of lite-on DVD drive key extractor [here]

OK. Let's get started!

Driver installation

Before you plug TIAO's liteon key extractor to you PC, you will first need to install the driver on your PC. Of course, once it is installed, you don't need to install it again. Please don't plug the key extractor to your USB port before you have the driver installed. The driver can be downloaded at [here]. Please follow the instructions [here] to install the driver.

Please remember to restart your PC once the driver is installed. After reboot, plug the key extractor to your PC's USB port and follow the instructions in the above pdf file to verify the success installation of the driver. Please write down the COM port number, because you will need this number later on.

Prepare Liteon DVD drive

Buy Game Console Adapters from http://www.easymg.com or http://www.diygadget.com

10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!