Difference between revisions of "XBOX 360 JTAG SPI NAND Flasher Solderless Addon Tutorial"
10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
(New page: You) |
(→How to use it?) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | You | + | <meta name="keywords" content="TIAOWIKI,JTAG,TJTAG,FTA,JTAG,WRT54G,DD-WRT,debrick,tomato,router,wireless router,motorola modem,sb5100,wiggler,arm,mips,avr,buffered jtag,unbuffered jtag,10 pin,20 pin, 12 pin,xbox,xbox 360,modchip mod-chip,mod chip,liteon,lite-on,samsung,hitachi,lg,dvd rom,sata,dvd key,usb probe,cable modem, usb spear,serial spear, serial probe, extract dvd key,mod xbox 360,video games"></meta> |
| + | <meta name="description" content="TIAOWIKI tutorials on how to fix your fta receiver, debrick your wireless router, fix you cable modem, mod your xbox 360, extract the xbox 360 dvd key, flash xbox 360 dvd firmware, flash ixtreme firmware"></meta> | ||
| + | |||
| + | <span class="plainlinks"> | ||
| + | |||
| + | <include nopre noesc src="/home/tiao/public_html/tiaowiki/wiki/extensions/include/360.inc"/> | ||
| + | Buy Game Console Adapters from [http://www.easymg.com/game-console-adapters.html http://www.easymg.com] or [http://www.diygadget.com/store/game-console-adapters/cat_6.html http://www.diygadget.com] | ||
| + | |||
| + | </span> | ||
| + | |||
| + | == What is this addon for? == | ||
| + | |||
| + | We have just released the solderless addon for our NAND Flasher. With this addon, you can read or write your NAND flash without soldering wires to your xbox 360 motherboard. | ||
| + | |||
| + | This is the item: | ||
| + | |||
| + | [http://www.diygadget.com/game-console-adapters/xbox-360-usb-spi-nand-flasher-solderless-addon.html http://www.diygadget.com/media/catalog/product/n/a/nand.flasher.solderless.addon.600.jpg] | ||
| + | |||
| + | You can buy it separately if you already have our USB SPI flasher, or you can buy it with our new USB SPI Flasher bundle: | ||
| + | |||
| + | [http://www.diygadget.com/game-console-adapters/xbox-360-usb-spi-jtag-utility-bundle-with-solderless-flasher-addon.html http://www.diygadget.com/media/catalog/product/3/6/360usbspi.1.600_1.jpg] | ||
| + | |||
| + | == How to use it? == | ||
| + | |||
| + | It is pretty easy to use it, the addon comes with 8 pogo pins and two bundles of flex wires. Each bundle of wire have 6 single flex wires with headers installed. One end has single female pin headers installed, and the other end has a 2x3 female headers installed. | ||
| + | |||
| + | You first follow the instruction below to have everything ready: | ||
| + | |||
| + | [[How to JTAG XBOX 360 Using TIAO USB SPI Interface]] | ||
| + | |||
| + | However you do NOT solder the JTAG/SPI wires to the motherboards (J1D2.1, J1D2.2, J1D2.3, J1D2.4, J1D2.6, J2B1.5 and J2B1.6). | ||
| + | |||
| + | At this point, insert the supplied pogo pins into the 2x3 female header as fellow: | ||
| + | |||
| + | <pre> | ||
| + | 6 pogo pins in one 2x3 header | ||
| + | 2 pogo pins in another 2x3 header | ||
| + | </pre> | ||
| + | |||
| + | See picture below: | ||
| + | |||
| + | [[Image:Jtag-solderless-addon-1.jpg|none|thumb|first 2x3 female header]] | ||
| + | [[Image:Jtag-solderless-addon-2.jpg|none|thumb|second 2x3 female header]] | ||
| + | |||
| + | |||
| + | Then, use a pen to write down which pin maps to which id, in my example, I have the following for the first 2x3 header: | ||
| + | |||
| + | <pre> | ||
| + | J1D2.1 -> Orange | ||
| + | J1D2.2 -> Red | ||
| + | J1D2.3 -> Yellow | ||
| + | J1D2.4 -> Brown | ||
| + | J1D2.6 -> Black | ||
| + | </pre> | ||
| + | |||
| + | And I have the following for the second 2x3 header: | ||
| + | |||
| + | <pre> | ||
| + | J2B1.5 -> Grey | ||
| + | J2B1.6 -> Purple | ||
| + | </pre> | ||
| + | |||
| + | [[Image:Jtag-solderless-addon-4.jpg|none|thumb|J1D2]] | ||
| + | |||
| + | [[Image:Jtag-solderless-addon-5.jpg|none|thumb|J2B1]] | ||
| + | |||
| + | Then, connect the corresponding single female pin headers to the USB Flasher's male header. There are labels on our flasher, so you won't make mistakes. | ||
| + | |||
| + | [[Image:Jtag-solderless-addon-3.jpg|none|thumb|Insert single pins to the XBOX 360 USB NAND flasher]] | ||
| + | |||
| + | Once you have wires ready, double check again to make sure everything is good, then hold the female headers on the J1D2 and J2B1 pads while you reading/writing the flash. | ||
| + | |||
| + | == Soldering the SMC-JTAG connection == | ||
| + | |||
| + | Read "Soldering the SMC-JTAG connection" at: | ||
| + | |||
| + | [[How to JTAG XBOX 360]] | ||
| + | |||
| + | |||
| + | <span class="plainlinks"> | ||
| + | |||
| + | <include nopre noesc src="/home/tiao/public_html/tiaowiki/wiki/extensions/include/adsense.inc"/> | ||
| + | Buy Game Console Adapters from [http://www.easymg.com/game-console-adapters.html http://www.easymg.com] or [http://www.diygadget.com/store/game-console-adapters/cat_6.html http://www.diygadget.com] | ||
| + | |||
| + | </span> | ||
Latest revision as of 01:36, 6 June 2010
Buy Game Console Adapters from http://www.easymg.com or http://www.diygadget.com
What is this addon for?
We have just released the solderless addon for our NAND Flasher. With this addon, you can read or write your NAND flash without soldering wires to your xbox 360 motherboard.
This is the item:
You can buy it separately if you already have our USB SPI flasher, or you can buy it with our new USB SPI Flasher bundle:
How to use it?
It is pretty easy to use it, the addon comes with 8 pogo pins and two bundles of flex wires. Each bundle of wire have 6 single flex wires with headers installed. One end has single female pin headers installed, and the other end has a 2x3 female headers installed.
You first follow the instruction below to have everything ready:
How to JTAG XBOX 360 Using TIAO USB SPI Interface
However you do NOT solder the JTAG/SPI wires to the motherboards (J1D2.1, J1D2.2, J1D2.3, J1D2.4, J1D2.6, J2B1.5 and J2B1.6).
At this point, insert the supplied pogo pins into the 2x3 female header as fellow:
6 pogo pins in one 2x3 header 2 pogo pins in another 2x3 header
See picture below:
Then, use a pen to write down which pin maps to which id, in my example, I have the following for the first 2x3 header:
J1D2.1 -> Orange J1D2.2 -> Red J1D2.3 -> Yellow J1D2.4 -> Brown J1D2.6 -> Black
And I have the following for the second 2x3 header:
J2B1.5 -> Grey J2B1.6 -> Purple
Then, connect the corresponding single female pin headers to the USB Flasher's male header. There are labels on our flasher, so you won't make mistakes.
Once you have wires ready, double check again to make sure everything is good, then hold the female headers on the J1D2 and J2B1 pads while you reading/writing the flash.
Soldering the SMC-JTAG connection
Read "Soldering the SMC-JTAG connection" at:
Buy Game Console Adapters from http://www.easymg.com or http://www.diygadget.com
10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
